12V Cordless Electric Ratchet Wrench Kit 3/8 Inch Drive 60 Ft Lbs Two Batteries

What This Tool Is For

This is a cordless electric ratchet wrench with an extended 5.5-inch neck — built for jobs where a standard ratchet head will not physically reach the fastener. Engine bay bolts tucked behind components, recessed fasteners inside equipment housings, bolts at the bottom of deep cavities — this is where the extended reach makes a real difference.

The 12V motor delivers 60 ft-lbs of torque at up to 250 RPM. That is higher torque than our standard 40 ft-lbs models, which makes it more capable on moderately tight fasteners. It will still not break loose severely rusted or over-torqued bolts on its own — break those free by hand first, then use this wrench to run them out.

Where the Extended Neck Actually Helps

• Engine bay bolts recessed behind brackets or intake components
• Transmission and differential fasteners in tight housings
• Bolts at the back of appliance panels where a short head cannot reach
• Under-vehicle fasteners with limited vertical clearance
• Equipment assembly where access is restricted to a narrow opening

Key Details Worth Knowing

5.5-inch extended neck. The longer neck puts the drive head about 5.5 inches ahead of the body, clearing most brackets and surrounding components that block a standard short-head ratchet.

60 ft-lbs torque. Meaningfully higher than the standard 40 ft-lbs models. Useful when fasteners are snug but not seized. Still a cordless ratchet, not an impact wrench — not designed for high-torque breakaway work.

Variable speed trigger, 0 to 250 RPM. Lower top speed than higher-voltage models, which gives finer control. Good for threading bolts slowly into tight or awkward positions without cross-threading.

Two batteries included. One runs while the other charges. Battery indicator light shows remaining charge.

Built-in LED light. Active while the trigger is held — useful in engine bays and dark work areas.

Multiple adapters included. Comes with 3/8 to 1/4-inch and 3/8 to 1/2-inch drive adapters, plus a 3-inch extension rod, giving flexibility across different socket sizes.

Specifications

• Drive size: 3/8 inch
• Voltage: 12V
• Max torque: 60 ft-lbs (80 N.m)
• Speed range: 0 to 250 RPM
• Extended neck length: approximately 5.5 inches
• Weight with battery: approximately 3.33 lbs
• Battery: 2 x 2.0Ah lithium-ion
• Color: Yellow

What Is Included

• 1 x 12V extended ratchet wrench
• 2 x lithium-ion batteries
• 1 x charger
• 6 x sockets (10, 12, 13, 14, 15, 17mm)
• 1 x 3/8 to 1/4-inch drive adapter
• 1 x 3/8 to 1/2-inch drive adapter
• 1 x 3-inch extension rod
• 1 x carry case
• 1 x user manual

Before You Buy

This wrench uses its own proprietary 12V battery. Battery compatibility with other 12V tool brands has not been confirmed — do not assume cross-brand compatibility.

If you do not need the extended reach and prefer a lighter tool, see our standard ratchet wrench models.